Probably Stolen Water Measuring: Exact 150 ml and 50 ml
Measure exact water volumes with the 450 ml, 750 ml and 2,000 ml bottles, then blend two tested batches without guessing what the container holds.
Why does an exact volume change the result?
A purity reading describes the share of a container, not an amount. Two liters at 98% carry twice the contaminant of one liter at 98%, so a blend only lands where you predicted when both volumes are known. A jug filled “about halfway” puts that error straight into the batch you are about to test and label.
The Bottle Printer covers 450 ml, 750 ml and 2,000 ml containers. Three exact sizes are enough to leave a measured remainder without eyeballing anything.
How do you leave exactly 150 ml?
- Fill the 450 ml bottle.
- Pour it into the 750 ml bottle. The large bottle now holds 450 ml and has 300 ml of room left.
- Fill the 450 ml bottle again.
- Pour from the small bottle into the same 750 ml bottle until it is full. Only 300 ml fits, so the 450 ml bottle keeps 150 ml.
The 150 ml is what survives the second 450 ml pour: 750 ml ends up in the large bottle and 150 ml stays in the small one, with nothing discarded. The 50 ml method below goes smaller, but it needs a different set of bottles.
How do you leave exactly 50 ml?
- Fill the 2,000 ml bottle.
- Pour out a full 750 ml bottle.
- Pour out a second full 750 ml bottle into a different container.
- Pour out a full 450 ml bottle.
The 2,000 ml bottle keeps 50 ml: 2,000 − 750 − 750 − 450. You need two empty 750 ml bottles and one 450 ml bottle to receive the pours, so stage them before you start. Do this with clean water rather than a batch you have already tested: the pours commit 1,950 ml to the receiving bottles just to isolate 50 ml, and a tested batch is worth more sold whole than broken up for a sample.
How do you check a blend before labeling it?
Add the volumes and weight each purity by its volume:
Blended purity = (volume A × purity A + volume B × purity B) ÷ (volume A + volume B)
| Batch | Volume | Purity | Water in the batch | Contaminant |
|---|---|---|---|---|
| A | 450 ml | 97.4% | 438.3 ml | 11.7 ml |
| B | 2,000 ml | 99.4% | 1,988.0 ml | 12.0 ml |
| Blend | 2,450 ml | 99.03% | 2,426.3 ml | 23.7 ml |
The blend stays High-Quality because 99.03% clears the 99% line: 2,000 ml at 99.4% pulls the 450 ml at 97.4% over the threshold, at a cost of 0.37 points on the clean batch. Run the same numbers in the water purity calculator with your own measurements, and keep the unit identical in both fields.
What else depends on a measured volume?
A Water Purification Tablet occupies 15 ml of the container, so a jug filled to the brim cannot take one. Leave the headroom when you fill, or the treatment has nowhere to go. The purification guide covers which contaminant each tool removes.
Wine is the other recipe that needs an exact volume: it takes 750 ml of water per bottle, so a partially filled jug leaves you short even when the numbers look close. The winemaking guide covers the full ingredient list.
Scanners report liquid volumes truncated to the hundredth of a milliliter, so a container holding 1,996 µl reads 1.99 mL. Type the reading you see rather than rounding it up.
Related Articles
guides
Probably Stolen Best Starting Perks: What Each Point Buys
Compare Probably Stolen starting perks by point cost: which picks pay for themselves, which drawbacks return points, and which fit a water or security run.
guides
Probably Stolen Addicts, Spiking and Poisoning Guide
Sell Phanta and Dream Dust to create returning addicts, spike water without killing the buyer, and compare the euphoria chance against the toxicity penalty.
guides
Probably Stolen Gene Modding Guide: DNA Manipulator and Seed Traits
Unlock gene modding in Probably Stolen, run the DNA Manipulator on seeds, manage complexity and heat, and keep the donor seed with a Genetic Stabilizer Module.
Was this helpful?
Thanks for the feedback!