Skip to content
Powered by Pagefind
English
Probably Stolen Guides

Probably Stolen Power Outages and Blackouts

What a blackout actually stops, which machines keep running on their own cells, and how Power Line Hijack plus a Current Converter makes a shop outage-proof.

11/7/2026 1.0.0.12 Last updated: 11/9/2026 5 min read

What counts as a blackout?

A blackout is a failure of the station grid, not of your machines. Power Service, anything plugged into it and every charging device on it lose the night.

That distinction decides whether you lose a night’s work. The shop has two separate power paths:

Path What it powers What a blackout does
Grid Power Service, Rechargers, PowerBlocs Stops for the night
Machine cell Production machines with their own battery Keeps running if the cell has charge

A Lower Levels Power Outage no longer counts as a blackout event as of 1.0.0.12, so the blackout rules above do not cover that night.

What happens to a machine during a blackout?

Nothing, as long as its own cell can cover the job. Machines draw from the cell in their own power-source slot, so a Furnace mid-smelt finishes whether or not the grid is up. The failure mode is a flat cell, not a dark station.

That makes the shop resilient in one direction and fragile in the other. Production survives a blackout; recharging does not. A run that charges cells overnight, sleeps through a blackout and expects a full shop in the morning loses the night and finds empty cells. The power and modules guide covers the charging loop and the equipment that does it.

What does a Current Converter change?

A Current Converter pays a machine’s power in credits at 1.5 credits per kJ instead of draining a cell. No charging, no flat-battery morning, and the cost is fixed enough to budget against rent.

Per finished job, before any discount:

Machine Draw Converter cost
Water Purifier 4 kJ 6 credits
Moisture Farm 6 kJ 9 credits
Furnace 8 kJ 12 credits
3D Printer 8 kJ 12 credits
Alarm System 4 kJ 6 credits
Vending Machine 2 kJ 3 credits

The vending machine is the awkward one: it draws every night whether or not it holds stock, so a converter turns an idle unit into a small standing cost. Every other row is paid only when the machine actually finishes a job.

1.0.0.12 makes Power Line Hijack cut that charge by 15% — roughly 1.28 credits per kJ — and adds Power Line Hijack II and III, which cut it further. The converter also counts as a Tool now.

Do converters work during a blackout?

Yes, with Power Line Hijack. The same upgrade that removes the nightly Power Service fee now lets converters run through a blackout, which closes the last gap in the shop’s power supply: machines on a converter no longer care whether the grid is up.

The order to buy in is straightforward. Power Line Hijack first, because it removes the Power Service fee and unlocks blackout operation. Then a converter on the machines you run every night: the purifier and the moisture farm on a water run, the furnace and printer on a metal run. Tiers II and III are worth their price once several converters are running, since the discount multiplies against every machine.

All three tiers sit in Wild’s Network with the other upgrades.

How do you catch a power problem before it costs a night?

Three warnings exist, and two of them arrived in 1.0.0.12:

  • The alarm shows as unpowered when its cell cannot cover the nightly draw, and the nightly report warns you about it.
  • Machine tooltips show the shortfall under Required Energy when the power source cannot finish the coming night.
  • Rechargers and PowerBlocs simply do less overnight, which you only see in the morning.

Check the alarm first. A unit that is switched on but unpowered does not protect the shop at all, and the theft it allows costs more than the cell it needed. The alarm and insurance guide covers the interception roll.

What is the morning routine after an outage?

  1. Read the nightly report before trading; it names the machines that failed and the alarm if it was unpowered.
  2. Check every cell that was on the grid, not only the one in the machine you were watching.
  3. Recharge before restarting a job, so the next night is not a second loss.
  4. If a blackout cost you a purifier night, retest the batch rather than assuming the tooltip’s Max Purity was reached.

For a shop that cannot tolerate either failure, converters plus Power Line Hijack replace charging entirely. For one that can, keep a spare charged cell per machine and accept the occasional lost night. The draw figures for every unit are in the machine table.

Related Articles

Was this helpful?